Tuesday, March 10, 2009

disc brake systems..



There are two main types of disc brake: mechanical (cable-actuated) and hydraulic. Mechanical disc brakes are almost always cheaper, but have less modulation, and may accumulate dirt in the cable lines since the cable is usually open to the outside.

Hydraulic disc brakes use fluid from a reservoir, pushed through a hose, to actuate the pistons in the disc calliper, that actuate the pads. They are better at excluding contaminants, but are difficult to repair on the trail, since they require fairly specialized tools. The brake lines occasionally require bleeding to remove air bubbles, whereas mechanical disc brakes rarely fail completely.

Also, the hydraulic fluid may boil on steep, continuous downhills. This is due to heat build up in the disc and pads and can cause the brake to lose its ability to transmit force ("brake fade") through incompressible fluids, since some of it has become a gas, which is compressible. To avoid this problem, 203 mm (8 inch) diameter disc rotors have become common on downhill bikes. Larger rotors require less calliper pressure for equal stopping power, dissipate heat more quickly, and have a larger amount of mass to absorb heat. Two types of brake fluid are used today: mineral oil and DOT fluid. Mineral oil is generally inert, while DOT is corrosive to frame paint but has a higher boiling point. Using the wrong fluid may cause the seals to swell or be corroded.


-wikipedia

2 comments:

~~m$. DoNNA~~ said...

based!!!

hehehehe....

gandang tanghali

Anonymous said...

Hi Friend.. Interesting post.. Nice blog.. Keep up the good work.. Do find time to visit my blog and post your comments.. Take care.. Cheers mate!!!